FIG Commission 6 - Engineering Surveys

Proceedings

FIG Proceedings

FIG Commission 6 Proceedings

 

2019

4th Joint International Symposium on Deformation Monitoring (JISDM2019)

15-17 May 2019, Athens, Greece

The joint symposium was organized by the School of Rural and Surveying Engineering of the National Technical University of Athens and was supported by FIG (WG 6.1),  IAG and ISPRS. The presentations covered several topics that included: quality control, quality assurance and optimization techniques in deformation analysis; point cloud-based space-temporal deformations; reference frames and geodynamics; cultural heritage/ bridge / dam / geohazards monitoring; multi-sensor systems and new concepts for deformation measurements; UAV for change detection and deformation monitoring.

2017

7th International Conference on Engineering Surveying (INGEO2017)

18 - 20 October 2017, Lisbon, Portugal

The conference by the Faculty of Civil Engineering Slovak University of Technology in Bratislava, the FIG C6 (Engineering Surveys) and the National Laboratory for Civil Engineering of Portugal. The presentations covered several topics that included: engineering surveying; structures monitoring; trends in methodology and development of technology; quality control of data.  

2016

3rd Joint International Symposium on Deformation Monitoring (JISDM2016)

30 March - 1 April, Vienna, Austria

The Symposium was organized by the FIG Working Group 6.1 (Deformation Measurement), the IAG  Sub-Commissions 4.2 (Geodesy in Geospatial Mapping and Engineering) and the Joint Working Group 0.2.1 (New Technologies for Disaster Monitoring and Management). One aim of the symposium was to highlight contributions from different fields of geodesy and geomatics, such as engineering geodesy, spatial geodesy, photogrammetry and remote sensing. Highlights of the conference programme included discussion of scientific progress related to the monitoring of terrain, objects and structures, such as ground subsidence, landslides, glacier movements, bridges, tunnels or wind turbines.  

2014

INGEO 2014 - 6th International Conference on Engineering Surveying

3-4 April 2014, Prague, Czech Republic

The conference was organized by the Faculty of Civil Engineering Slovak University of Technology in Bratislava, the FIG Commission 6 (Engineering Surveys) and Faculty of Civil Engineering of the Czech Technical University in Prague. The themes included trends in methodology and technology development in engineering surveying; engineering surveying procedures for industry ; lasers and laser measurement systems;new technologies for deformation measurements.

2012

1st International FIG Workshop on Monitoring High Rise and Tall Engineering Structures Development and Practice

22-23 November 2012, Hong Kong, China

The workshop was organized by The Hong Kong Polytechnic University, the FIG Commission 6 (Engineering Surveys) and The University of Nottingham Ningbo China. The themes included: setting out high rise and tall engineering structures; control network using GNSS; structural health monitoring; sensor fusion and analysis.    

2011

1st Joint International Symposium on Deformation Monitoring (JISDM)

2-4 November 201, Kowloon, Hong Kong, China

The join symposium combined the 14th FIG Symposium on Deformation Measurement and Analysis, the 5th IAG Symposium on Geodesy for Geotechnical and Structural Engineering and the 2nd International Workshop on Spatial Information Technologies for Monitoring the Deformation of Large-Scale Man-made Linear Features. It was organized by the Department of Land Surveying and Geo-Informatics of The Hong Kong Polytechnic University, the FIG Working Group 6.1 (Deformation Measurement), the IAG  Sub-Commissions 4.2 (Applications of Geodesy in Engineering) 4.4 (Applications of Satellite and Airborne Imaging Systems), and the Engineering Surveying Sub-Society of the Chinese Society for Geodesy, Photogrammetry and Cartography.  

2009

FIG Commissions 5, 6 and SSGA Workshop “Innovative Technologies for an Efficient Geospatial Management of Earth Resources”

23-30 July 2009, Listvyanka, Russian Federation

The workshop on “Innovative Technologies for an Efficient Geospatial Management of Earth Resources” was organized by  FIG Commissions 5 (Positioning and Measurement) and 6 (Engineering Surveys) together with the Siberian State Academy Of Geodesy, the Technische Universität Berlin and the Irkutsk State Technical University. The rapid development of new innovative technologies forces the need for meetings all over the world for better exchange of knowledge regarding efficient usage. To achieve the millennium goals, transmission of knowledge concerning rapid technological changes in geodesy, photogrammetry, GIS, remote sensing, CORS and DGNNS augmentation systems also have to be central to modern educational programmes.

2008

Joint symposia: 13th FIG Symposium on Deformation Measurement and Analysis & 4th IAG Symposium on Geodesy for Geotechnical and Structural Engineering

12-15 May 2008, Lisbon, Portugal

The second jointly held symposium on deformation measurements and analysis was held May 12 – 15, 2008 in Lisbon, Portugal. The symposium was a combined meeting of the FIG Commission 6, Working Group 6.1, Deformation Measurements and Analysis and the IAG Sub-commission 4.2, Applications of Geodesy in Engineering. The theme of the symposium “Measuring the Changes”, reflects the importance, and demand, for fully automated, continuous, and reliable deformation monitoring in the civil engineering, mining, and energy sectors.  

2004

INGEO 2004 and FIG Regional Central and Eastern European Conference on Engineering Surveying

11-13 November, Bratislava, Slovakia

The 3rd International Conference on Engineering Surveying INGEO 2004 was held November 11-13 in Bratislava, Slovakia. INGEO 2004 was organised by FIG Commission 6 and Department of Surveying, SUT, Bratislava, Slovakia. 39 papers were presented and representatives from more than 15 countries participated in this well organized event.

1st International Symposium on Engineering Surveys for Construction Works and Structural Engineering

28 June – 1 July 2004, Nottingham, United Kingdom

The 1st International Symposium on Engineering Surveys for Construction Works and Structural Engineering organised by FIG Commission 6 was held in Nottingham, United Kingdom, 28 June – 1 July 2004. The Symposium was hosted by the Institute of Engineering Surveying and Space Geodesy, University of Nottingham. It included a workshop of the Special Task Force 6.1.1 established under Working Group 6.1, “Measurements and Analysis of Cyclic Deformations and Structural Vibrations”.

2003

11th FIG Symposium on Deformation Measurement

25-28 May 2003, Santorini, Greece

The 11th FIG Symposium on Deformation Measurement was held in Santorini, Greece May 25-28, 2003. This symposium organised by FIG Commission 6 (surveying Engineering) working group on Deformation Measurement has the longest tradition in FIG as a Commission organised event on a certain topic. This time this symposium attracted more than 130 participants from 29 countries – major national groups represented were Polish, Italian and, of course, Greek. Participation of more than 15 delegates, among them students and scientists from less developed countries became possible through grants from the sponsors of the symposium.

2002

INGEO 2002

11-13 November, Bratislava, Slovakia

The 2nd International Conference of Engineering Surveying - INGEO 2002 is organised by the Department of Surveying of the Slovak University of Technology and was held in the Congress Centrum of the Slovak Saving Bank in Bratislava. The co-operation with the members of FIG Commission 6, WG6.2 Engineering Surveys for Industry and Research, the Chamber of Surveyors and Cartographers and the Slovak Union of Surveyors contributed to the high level of this conference. The papers were grouped in four major themes: Model Building and Data Processing; Deformation Measurement; Photogrammetry Applications; Sensors and Laser Equipments.

2001

10th FIG International Symposium on Deformation Measurements

19-22 March 2001, California, United States

The 10th International Symposium on Deformation Measurements, organized by Commission 6 was held in Orange, California. The symposium was hosted by the metropolitan Water District of Southern California in cooperation with the Department of Geodesy and Geomatics Engineering of the University of New Brunswick, United States Geological Survey, Scripps Institution of Oceanography’s Orbit and Permanent Array Center, and Leica Geosystems. There were numerous technical presentations such as structural deformations, theory of design and analysis of deformation measurements, automation of structural health/deformation monitoring systems and more. In addition to the technical presentations there were poster paper sessions and exhibits by the industry suppliers.