Welcome to the home page of FIG Commission 6 -
Engineering Surveys
FIG Commission 5 and 6 Technical Seminar "Reference
Frame In Practice" - 4-5 May 2012, Rome, Italy
Organised by IAG (International Association of Geodesy), FIG
(Fédération Internationale des Géomètres) and ICG (International
Committee on GNSS). In association with the FIG Working Week, 6th - 10th
May 2012, Rome, Italy
The third FIG Commissions 5 and 6 Workshop on “Innovative
Technologies for an Efficient Geospatial Management of Earth Resources”
will be held for the first time in Ulaanbaatar, Mongolia, 4-8 September
2011.The Workshop is organized by the International Federation of
Surveyors (FIG), Mongolian Association of Geodesy Photogrammetry &
Cartography (MAGP&C) and Siberian State Academy of Geodesy (SSGA).
General
Assembly for the International Union of Geodesy and Geophysics Earth on
Edge: Science for a
Sustainable Planet June 28 –July 7, Melbourne, Australia
Rob Sarib, Mikael Lilje, Graeme Blick and Allison Kealy participated
in the conference as well as the General Assembly and relevant business
meetings
Commission 6 at the FIG Working Week, May 2011 Marrakech
Morocco
Joint International Symposium on Deformation Monitoring
(JIS-DM) 2 - 4 November 2011, Hong Kong, China
Co-organised between IAG and FIG Commission 6 including FIG Symposium
on Deformation Measurements and Analysis, IAG Symposium on Geodesy for
Geotechnical and Structural Engineering, and International Workshop on
Spatial Information Technologies for Monitoring the Deformation of
Large-Scale Man-Made Linear Features
More information
(pdf)
Web site:
http://dma.lsgi.polyu.edu.hk/
INGEO 2011 - 22-24 September 2011, Brijuni, Croatia
INGEO 2011 is organised by the Faculty of Civil Engineering, Slovak
University of Technology in Bratislava, Faculty of Geodesy, University
of Zagreb together with FIG Commission 6.
Parallel with the conference programme the sessions of the FIG
Commission 6 WGs for Engineering Surveying will be organised.
More information (pdf 251
kb)
Web Site:
http://www.svf.stuba.sk/INGEO2011
FIG Commissions 5 and 6
Workshop on “Innovative Technologies for an Efficient Geospatial
Management of Earth Resources” - Blue Bay Recreation Centre,
Zyryanovsky Region, Kazakhstan, 3-7 September 2010
|
Participants at the Workshop in Kazakhstan |
FIG Commissions 5 (Positioning and Measurement) and 6
(Engineering Surveys) together with Agency of the Republic of
Kazakhstan for Land Resources Management, D. Serikbaev East
Kazakhstan State Technical University (EKSTU), Siberian State
Academy of Geodesy (SSGA) and Regional Scientific and
Technological Park “Altai” organised a Workshop on “Innovative
Technologies for an Efficient Geospatial Management of Earth
Resources”. The Conference was attended by about 100
participants and contained almost 60 presentations.
Proceedings of the Workshop will be available soon
|
Commission 6 at the FIG Congress 2010 in Sydney, Australia, 11-16 April 2010
|
Gethin W. Roberts |
Commission 6 had its annual meeting during the
FIG Congress 2010 in Sydney, Australia, 11-16 April 2010. The
General Assembly appointed Dr. Gethin W. Roberts from
United Kingdom as
the Chair of Commission 6 for 2011-2014.
|
Commission 6
FIG Commission 6 deals with activities concerning
- Acquisition, processing and management of topometric data and of
all related information throughout the life cycle of a project;
- Development and implementation of adequate survey methods in
Engineering projects;
- Metrology, quality control and validation for civil construction
and manufacturing of large objects;
- Deformation monitoring, analysis and interpretation;
- Prediction of deformation and movements in Engineering projects,
mines and areas of geological hazard.
The goals of Commission 6 are to
- Promote the knowledge, skills and abilities of surveyors in civil
and industrial works within the various professional fields of
Engineering;
- Support all development and multidisciplinary expertise leading to
integrated survey methods, using various instruments and sensors and
combining geometry with all other data relevant to each Engineering
problem;
- Provide a forum for exchange of knowledge related to Engineering
analysis of survey data for the study of structures;
- In addition to the links with related Working Groups of IAG, ISM
and ISPRS, look for possible connections within organisations of
civil, structural and mechanical engineers and within those dealing
with metrology and quality control - at the national and
international level.
Commission 6 has established three
Working
Groups for 2011-2014.
Chair of FIG Commission 6
Prof. Gethin Wyn Roberts
University of Nottingham
Administrative Building Room 212,
The University of Nottingham Ningbo, China,
199 Taikang East Road,
Ningbo, 315100,
CHINA
Tel. +86 (0)574 8822 2623
E-mail:
gethin.roberts@nottingham.edu.cn
Web site:
www.nottingham.edu.cn |
FIG Commission
6 Webmaster
FIG Office
International Federation of Surveyors, FIG
Kalvebod Brygge 31-33
DK-1780 Copenhagen V
DENMARK
e-mail: FIG@fig.net
Tel + 45 3886 1081
Fax + 45 3886 0252 |
|
|
